2024-11 |
Mechanistic insight into phosphorus migration pathways from oolitic hematite using in-situ observations during roasting and reduction process |
Separation and Purification Technology
|
2024-10 |
Selective stabilization of chromium and sustainable treatment of stainless steel slags |
Journal of Environmental Chemical Engineering
|
2024-09 |
High-temperature oxidation mechanism and microstructure evolution of Cr-Mn-Si alloyed steel oxidized by Fe 2 O 3 contained in mold flux |
Ceramics International
|
2024-08 |
Migration behavior of iron and phosphorus during gas-based reduction for high-phosphorus iron ore |
Minerals Engineering
|
2024-03 |
Oxidation behavior of Cr–Mn–Si alloyed steel by mold flux melt in high temperatures |
Journal of Materials Research and Technology
|
2024-03 |
Investigation of (H2–H2O) partial pressure on the gas-based reduction of fine iron ore in mixed gases (H2–H2O–CO–CO2–N2) |
Journal of Materials Research and Technology
|
2024-02 |
Effect of Volatiles from Spent Coffee Grounds Biomass to Reduce Ni(OH)2 at Moderate Temperature |
Metals and Materials International
|
2024-02 |
Effect of lepidolite on melting, viscosity and structure of CaO–SiO2 based melt |
Ceramics International
|
2024-01 |
In situ observation of the austenite to ferrite transformation in low-carbon steels from different initial phases at defined cooling rates |
Journal of Materials Research and Technology
|
2024-01 |
Metallothermic reduction of Sc2O3 using Al–Ca alloys equilibrated with CaO–CaCl2 flux |
Journal of Materials Research and Technology
|
2023-12 |
Effect of Al–Ti Concentration on Alumina Inclusions Aggregation Floating Behavior in Molten IF Steel |
Steel Research International
|
2023-12 |
Homogenization on solution treatment and its effects on the precipitation-hardening of selective laser melted 17-4PH stainless steel |
Journal of Materials Science & Technology
|
2023-09 |
Dissolution of TiO2 and TiN inclusions in CaO–SiO2–B2O3-based fluorine-free mold flux |
International Journal of Minerals, Metallurgy and Materials
|
2023-07 |
In-situ observation and crystallization kinetics during the solidification of Cr-containing stainless steel slags |
Journal of Materials Research and Technology
|
2023-07 |
Effects of K2CO3 addition on the physicochemical properties of goethite composite pellets with different basicities (CaO/SiO2) |
Journal of Materials Research and Technology
|
2023-06 |
Electrochemical Reduction of K<inf>2</inf>MoO<inf>4</inf>–Fe<inf>2</inf>O<inf>3</inf> Binary Melts Using a Consumable Steel Electrode to Produce Ferromolybdenum Alloys |
Journal of Sustainable Metallurgy
|
2023-03 |
Solid‐State Reaction Heterogeneity During Calcination of Lithium‐Ion Battery Cathode |
Advanced Materials
|
2023-02 |
The Dissolution of Ca12Al14O33 Crystal in CaO–Al2O3–SiO2-Based Melt and Its Structural Evolution with SiO2 Additions |
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
|
2022-12 |
Compositional dependence of thermophysical properties in binary alkaline earth borate melts: Insights from structure in short-range and intermediate-range order |
Journal of Materials Science and Technology
|
2022-10 |
Volatilization of fluorine in a CaO–SiO<inf>2</inf>–CaF<inf>2</inf>-based system with the substitution of Na<inf>2</inf>O with K<inf>2</inf>O |
Journal of the American Ceramic Society
|
2022-10 |
Critical challenges facing low carbon steelmaking technology using hydrogen direct reduced iron |
Joule
|
2022-09 |
Effects of alkali metal cations and fluoride anions on viscosity and structure of CaO-SiO2-Al2O3 system |
Journal of Materials Research and Technology
|
2022-08 |
Topological understanding of thermal conductivity in synthetic slag melts for energy recovery: An experimental and molecular dynamic simulation study |
Acta Materialia
|
2022-08 |
Separation of Zn and Fe in ZnFe2O4 by Reaction With MgCl2 |
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
|
2022-03 |
Pyrometallurgical processing of ferrous slag "co-product" zero waste full utilization: A critical review |
RESOURCES CONSERVATION AND RECYCLING
|
2021-11 |
Viscous behavior of high-FetO-bearing slag systems in relation to their polymeric structural units |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
|
2021-05 |
Slag foaming estimation in the electric arc furnace using machine learning based long short-term memory networks |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
|
2021-04 |
Sustainable Direct Synthesis of TiAl Alloys Through Magnesiothermic Reduction |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2021-04 |
Understanding the solidification and leaching behavior of synthesized Cr-containing stainless steel slags with varying Al2O3/SiO2 mass ratios |
CERAMICS INTERNATIONAL
|
2021-02 |
Effect of TiO2 and TiN on the Viscosity, Fluidity, and Crystallization of Fluorine‐Free Mold Fluxes for Casting Ti‐Bearing Steels |
STEEL RESEARCH INTERNATIONAL
|
2021-02 |
Immobilizing chromium in stainless steel slags with MnO addition |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2021-01 |
Gaining insights on high-temperature thermal conductivity and structure of oxide melts through experimental and molecular dynamics simulation study |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
|
2021-01 |
Review on the high-temperature thermophysical properties of continuous casting mold fluxes for highly alloyed steels |
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
|
2020-12 |
Review on the high-temperature thermophysical properties of continuous casting mold fluxes for highly alloyed steels |
ISIJ INTERNATIONAL
|
2020-09 |
Selective Elemental Concentration during the Solidification of Stainless Steel Slags for Increased Cr Recovery with MnO Addition |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2020-08 |
Editorial: 50 Years of High Impact Research |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2020-07 |
Fundamental thermokinetic study of a sustainable lithium-ion battery pyrometallurgical recycling process |
RESOURCES CONSERVATION AND RECYCLING
|
2020-06 |
Editorial: 50 Years of High Impact Research |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2020-01 |
Electrochemical Preparation of Water-Reactive Silicon with Potential Applications in Hydrogen Generation |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
|
2020-01 |
Influence of the Al2O3/SiO2 mass ratio and gas composition on the viscous behavior and structure of Cr-containing stainless steel slags |
CERAMICS INTERNATIONAL
|
2020-01 |
The evolution of the mold flux melt structure during the process of fluorine replacement by B2O3 |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2019-11 |
Effect of NaF and CaO/SiO2 Mass pct. on the Hydrogen Dissolution Behavior in Calcium-Silicate-Based Molten Fluxes |
METALS AND MATERIALS INTERNATIONAL
|
2019-11 |
Effect of CaF2, B2O3 and the CaO/SiO2 mass ratio on the viscosity and structure of B2O3‐containing calcium‐silicate‐based melts |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2019-10 |
Understanding the Magnesiothermic Reduction of Intermediate TiNb2O7 to Produce Ti-Nb Alloys |
JOM
|
2019-10 |
Substitutional effect of Na2O with K2O on the viscosity and structure of CaO-SiO2-CaF2-based mold flux systems |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2019-09 |
Experimental determination of phase equilibria in the CaO-BaO-SiO2-12 mol pct. Al2O3-13 mol pct. MgO system at 1573 K and 1623 K |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2019-07 |
Effects of Si Content and Forging Pressure on the Microstructural and Mechanical Characteristics in Semi-solid Forging of Al-Si-Mg Alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2019-05 |
Crystallization behavior and structure analysis for molten CaO-SiO2-B2O3 based fluorine-free mold fluxes |
JOURNAL OF NON-CRYSTALLINE SOLIDS
|
2019-04 |
Fundamentals of Hydrogen Solubility in Calcium-Alumino-Silicate Molten Fluxes Containing NaF |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2018-11 |
Effect of the Al2O3/SiO2 mass ratio on the crystallization behavior of CaO-SiO2-MgO-Al2O3 slags using confocal laser scanning microscopy |
CERAMICS INTERNATIONAL
|
2018-10 |
Effects of Simultaneous Static and Traveling Magnetic Fields on the Molten Steel Flow in a Continuous Casting Mold |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2018-10 |
Selective metal cation concentration during the solidification of stainless steel EAF dust and slag mixtures from high temperatures for increased Cr recovery |
JOURNAL OF HAZARDOUS MATERIALS
|
2018-10 |
Effects of Cu and Si Contents on the Fluidity, Hot Tearing, and Mechanical Properties of Al-Cu-Si Alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2018-09 |
Effect of substituting CaO with BaO on the viscosity and structure of CaO-BaO-SiO2-MgO-Al2O3 slags |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2018-07 |
A Review of In Situ Observations of Crystallization and Growth in High Temperature Oxide Melts |
JOM
|
2018-07 |
Effect of Compositional Variation in TiO2-Based Flux-Cored Arc Welding Fluxes on the Thermo-physical Properties and Mechanical Behavior of a Weld Zone |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2018-06 |
Reduction Behavior of Dolomite-Fluxed Magnetite: Coke Composite Pellets at 1573 K (1300 °C) |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2018-02 |
Key lubrication concepts to understand the role of flow, heat transfer and solidification for modelling defect formation during continuous casting |
ISIJ INTERNATIONAL
|
2018-02 |
Effect of Initial FeO Content and CaO:SiO2 Ratio on the Reduction Smelting Kinetics of the CaO-SiO2-MgOsatd.-FeO Slag System |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2018-01 |
Potential utilization of hazardous mining wastes in the production of lightweight aggregates |
Mineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy
|
2017-09 |
Magnesiothermic reduction for direct synthesis of Ti-Nb alloy at 1073 K (800 °C) |
METALS AND MATERIALS INTERNATIONAL
|
2017-09 |
Effect of ZrO2 on the Melting, Viscosity, and Crystallization Behaviors of Fluorine-Free Mold Flux for Casting Medium Carbon Steels |
STEEL RESEARCH INTERNATIONAL
|
2017-08 |
Understanding the solidification of stainless steel slag and dust mixtures |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2017-08 |
Wetting Behavior of Mold Flux Droplet on Steel Substrate With or Without Interfacial Reaction |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2017-06 |
Evaluating the heat transfer phenomena and the interfacial thermal resistance of mold flux using a copper disc mold simulator |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
2017-04 |
Understanding the Magnesiothermic Reduction Mechanism of TiO2 to Produce Ti |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2017-04 |
Analysis of sustainability in materials education and research in Korea |
Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy
|
2017-03 |
Investigation on the Reduction Behavior of Coal Composite Pellet at Temperatures between 1373 and 1573 K |
STEEL RESEARCH INTERNATIONAL
|
2017-03 |
Effect of basicity and B2O3 on the viscosity and structure of fluorine-free mold flux |
JOURNAL OF NON-CRYSTALLINE SOLIDS
|
2017-02 |
Selective Separation of Fe-Concentrates in EAF Slags Using Mechanical Dissimilarity of Solid Phases |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2016-11 |
Effect of magnesium on the phase equilibria in magnesio-thermic reduction of Nb2O5 |
MATERIALS LETTERS
|
2016-08 |
Thermo-Physical Properties of B2O3-Containing Mold Flux for High Carbon Steels in Thin Slab Continuous Casters: Structure, Viscosity, Crystallization, and Wettability |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2016-08 |
In-Situ Observation of Crystallization and Growth in High-Temperature Melts Using the Confocal Laser Microscope |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2016-06 |
Interfacial Kinetics of High-Al-Containing Ultra-Lightweight Steels with Calcium Silicate-Based Molten Oxides at High Temperature |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2016-06 |
Effect of Rb2O and Cs2O on Inclusion Removal in 321 Stainless Steels Using Novel Basic Tundish Fluxes |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2016-05 |
Achieving a Carbon Neutral Society without Industry Contraction in the Five Major Steel Producing Countries |
SUSTAINABILITY
|
2016-02 |
Effect of Na2O on the High-Temperature Thermal Conductivity and Structure of Na2O-B2O3 Melts |
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
|
2016-02 |
Effect of casting parameters on the microstructure and mechanical properties of ADC10 alloys using a semisolid die casting and heat treating process |
Materials Transactions
|
2016-01 |
High-temperature wettability and structure of the TiO2-MnO-SiO2-Al2O3 welding flux system |
JOURNAL OF NON-CRYSTALLINE SOLIDS
|
2015-12 |
Hydrogen dissolution and structural analysis in high temperature TiOxeMnOeSiO2 oxide melts |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
|
2015-09 |
미래를 향하는 한국 마이크로 패키징 학회지의 과거와 현재 연구영역에 관한 연구 |
마이크로전자 및 패키징학회지
|
2015-07 |
Valorization of electric arc furnace primary steelmaking slags for cement applications |
WASTE MANAGEMENT
|
2015-07 |
DFT study on the adsorption and absorption behaviors of liquid nitrogen in the Mg nano alloys synthesized from powder metallurgy |
COMPUTATIONAL MATERIALS SCIENCE
|
2015-06 |
DRI from Recycled Iron Bearing Wastes for Lower Carbon in the Blast Furnace |
ISIJ INTERNATIONAL
|
2015-06 |
함철부산물을 활용한 탄재 내장 단괴 제조에 관한 연구 |
자원리싸이클링
|
2015-04 |
Effect of Hot Metal on Decarburization in the EAF and Dissolved Sulfur, Phosphorous, and Nitrogen Content in the Steel |
ISIJ INTERNATIONAL
|
2015-04 |
FeMn Metal Droplet Behavior in the MnO-SiO2-CaO Slag System |
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
|
2015-03 |
Global Scrap Trading Outlook Analysis for Steel Sustainability |
Journal of Sustainable Metallurgy
|
2015-03 |
Effect of Hot Metal Utilization on the Steelmaking Process Parameters in the Electric Arc Furnace |
STEEL RESEARCH INTERNATIONAL
|
2015-01 |
Microstructural Evolution in Semisolid Forging of A356 Alloy |
METALS AND MATERIALS INTERNATIONAL
|
2015-01 |
제강 슬래그를 활용한 탄산화 반응에 대한 속도론적 고찰 |
KOREAN JOURNAL OF METALS AND MATERIALS
|
2015-01 |
Looking Back at Steel Research International and Its Future |
STEEL RESEARCH INTERNATIONAL
|
2014-11 |
Characteristics of Medium Carbon Steel Solidification and Mold Flux Crystallization Using the Multi-Mold Simulator |
METALS AND MATERIALS INTERNATIONAL
|
2014-10 |
Fundamentals of hydrogen dissolution in novel calcium-Aluminate welding fluxes containing FeOt and NaF for advanced high strength steels |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
|
2014-10 |
Effect of SiO2/Al2O3 and TiO2/SiO2 Ratios on the Viscosity and Structure of the TiO2-MnO-SiO2-Al2O3 Welding Flux System |
ISIJ INTERNATIONAL
|
2014-09 |
Review of Innovative Energy Savings Technology for the Electric Arc Furnace |
JOM
|