2023-05 |
Relative Positioning Error Minimization of the Dual-Robot System With Kinematic and Base Frame Transformation Parameter Identification |
IEEE Access
|
2023-03 |
Real-time hand ownership decision in egocentric view using kinematic approach |
Journal of Ambient Intelligence and Humanized Computing
|
2023-01 |
Exit delamination at the material interface in drilling of CFRP/metal stack |
Journal of Manufacturing Processes
|
2022-12 |
Posture optimization in robotic drilling using a deformation energy model |
Robotics and Computer-Integrated Manufacturing
|
2022-12 |
코너링 오차 및 기구학적 제한값 간의 관계를 활용한 공구경로 계획 |
Journal of the Korean Society for Precision Engineering
|
2022-11 |
Optimization of gas shielding for the vacuum laser beam welding of Ti-6Al-4 V titanium alloy |
International Journal of Advanced Manufacturing Technology
|
2022-10 |
Contamination suppression of coupling glass during vacuum laser welding |
Science and Technology of Welding and Joining
|
2022-07 |
Machining sound analysis for the effects of fiber bending on cutting mechanisms during carbon fiber reinforced plastic composite milling |
Composites Part B: Engineering
|
2022-06 |
Real-time tool path modification for machine tool contour error reduction |
International Journal of Advanced Manufacturing Technology
|
2022-05 |
Effect of fiber bending induced matrix shear behavior on machined surface quality in carbon fiber reinforced plastic milling |
Composite Structures
|
2022-03 |
Simulation-based optimization of CNC interpolator parameters for machining accuracy improvement |
International Journal of Advanced Manufacturing Technology
|
2022-02 |
Effect of workpiece preheating on tool wear and delamination at the hole exit in high feed drilling of carbon fiber reinforced plastics with diamond-coated tools |
Journal of Manufacturing Processes
|
2022-01 |
Modelling of fume particle behaviour and coupling glass contamination during vacuum laser beam welding |
Science and Technology of Welding and Joining
|
2021-03 |
전자빔을 이용한 미세 홀 가공 시 전자빔 조사량 변화에 따른 용융 깊이 특성 연구 |
한국정밀공학회지
|
2020-08 |
Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares method |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
|
2020-06 |
Joint Compliance Error Compensation for Robot Manipulator Using Body Frame |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2019-12 |
Contamination of coupling glass and performance evaluation of protective system in vacuum laser beam welding |
APPLIED SCIENCES-BASEL
|
2019-09 |
Robotic Machining: A Review of Recent Progress |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2019-05 |
Ultrasonic impact treatment and corrosion test after the austenite phase transformation of SKD11 using a plasma diode electron beam |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
|
2019-04 |
Post‑machining Deformation Analysis for Virtual Machining of Thin Aluminium Alloy Parts |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2019-01 |
Wettability modification of cyclic olefin copolymer surface and microchannel using micromilling process |
Journal of Manufacturing Processes
|
2018-08 |
Effect of chemical oxidizer on material removal rate in electrochemical oxidation assisted machining |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
|
2018-03 |
정밀가공을 위한 CNC 알고리즘 연구 현황 |
한국정밀공학회지
|
2018-01 |
A Review on Optical Fiber Sensors for Environmental Monitoring |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
|
2018-01 |
Material interface detection based on secondary electron images for focused ion beam machining |
ULTRAMICROSCOPY
|
2017-12 |
Cryogenic machining of PDMS fluidic channel using shrinkage compensation and surface roughness control |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2017-12 |
Fabrication of a Screw-Shaped Long-Period Fiber Grating for Refractive Index Sensing |
IEEE PHOTONICS TECHNOLOGY LETTERS
|
2017-10 |
Limiting Tool Path Error Generated by Corner Blending of CNC Interpolator |
한국정밀공학회지
|
2017-10 |
Plasma Diode Electron Beam Heat Treatment of Cast Iron: Effect of Direct Preheating |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2017-08 |
Contact Effect of ReS<inf>2</inf>/Metal Interface |
ACS APPLIED MATERIALS & INTERFACES
|
2017-07 |
Austenite phase transformation of SKD11 by surface heat treatment with a focused electron beam |
SURFACE & COATINGS TECHNOLOGY
|
2017-05 |
Simulation-based machining condition optimization for machine tool energy consumption reduction |
JOURNAL OF CLEANER PRODUCTION
|
2017-04 |
액체질소 분사 안정화를 통한 극저온가공 품질 향상 |
한국정밀공학회지
|
2017-03 |
Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micromilling process |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2017-01 |
Effect of Electrochemical Conditions on Material Removal Rate in Electrochemical Oxidation Assisted Machining |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
|
2016-06 |
탄소섬유복합재 가공의 결함특성 및 결함 저감을 위한 경계검출 |
한국정밀공학회지
|
2016-01 |
가상제조환경에서 제품의 표면 거칠기 전달을 위한 촉각 디스플레이 |
한국정밀공학회지
|
2015-11 |
Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation |
OPTICS AND LASER TECHNOLOGY
|
2015-09 |
Effects of coating material on the fabrication accuracy of focused ion beam machining of insulators |
JAPANESE JOURNAL OF APPLIED PHYSICS
|
2015-09 |
Friction compensation controller for load varying machine tool feed drive |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2015-08 |
Distributed Component Friction Model for Precision Control of a Feed Drive System |
IEEE-ASME TRANSACTIONS ON MECHATRONICS
|
2015-06 |
3D thickness profile measurement of thin films coated on the microscopic area |
MEASUREMENT SCIENCE & TECHNOLOGY
|
2015-06 |
Compensation of tool deflection in micromilling using workpiece holder control device |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2015-05 |
CNC 제어 이송계의 Hardware-in-the-loop 시뮬레이션 |
한국정밀공학회지
|
2015-05 |
Layer dependence and gas molecule absorption property in MoS2 Schottky diode with asymmetric metal contacts |
SCIENTIFIC REPORTS
|
2015-04 |
Material Removal of Glass by Magnetorheological Fluid Jet |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2015-04 |
Ductile mode electrochemical oxidation assisted micromachining for glassy carbon |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2015-03 |
Electrochemical Oxidation Assisted Micromachining of Glassy Carbon Substrate |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2015-02 |
Experimental demonstration of line-width modulation in plasmonic lithography using a solid immersion lens-based active nano-gap control |
APPLIED PHYSICS LETTERS
|
2015-01 |
Emission Characteristics of High-Voltage Plasma Diode Cathode for Metal Surface Modification |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2014-10 |
Experimental and numerical investigations of cavity filling process in injection moulding for microcantilever structures |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
|
2014-09 |
Electrically assisted blanking using the electroplasticity of ultra-high strength metal alloys |
CIRP ANNALS-MANUFACTURING TECHNOLOGY
|
2014-07 |
Simulation-Based Energy Usage Profiling of Machine Tool at the Component Level |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
|
2014-04 |
Polarization-dependent transmission through a bull's eye with an elliptical aperture |
OPTICS COMMUNICATIONS
|
2013-11 |
A high throughput supra-wavelength plasmonic bull's eye photon sorter spatially and spectrally multiplexed on silica optical fiber facet |
OPTICS EXPRESS
|
2013-10 |
Synthesis and Bidirectional Frequency Tuning of Cantilever-shape Nano Resonators Using A Focused Ion Beam |
ACS APPLIED MATERIALS & INTERFACES
|
2013-07 |
Mechanism of synergetic material removal by electrochemomechanical magnetorheological polishing |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2013-02 |
Spatially discrete thermal drawing of biodegradable microneedles for vascular drug delivery |
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
|
2012-11 |
Fabrication of ordered bulk heterojunction organic photovoltaic cells using nanopatterning and electrohydrodynamic spray deposition methods |
NANOSCALE
|
2012-10 |
High-speed plasmonic nanolithography with a solid immersion lens-based plasmonic optical head |
APPLIED PHYSICS LETTERS
|
2012-08 |
Application of Solid Immersion Lens-Based Near-Field Recording Technology to High-Speed Plasmonic Nanolithography |
JAPANESE JOURNAL OF APPLIED PHYSICS
|
2012-04 |
미세밀링공정의 최근 연구동향 |
한국기계가공학회지
|
2012-02 |
Deburring microparts using a magnetorheological fluid |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2011-10 |
Micro-electrochemical discharge cutting of glass using a surface-textured tool |
CIRP Journal of Manufacturing Science and Technology
|
2011-06 |
Subwavelength plasmonic lens patterned on a composite optical fiber facet for quasi-one-dimensional Bessel beam generation |
APPLIED PHYSICS LETTERS
|
2011-05 |
Ploughing detection in micromilling processes using the cutting force signal |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2011-05 |
A behavior model of a magnetorheological fluid in direct shear mode |
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
|
2011-03 |
다개구 이온빔 가공장치용 냉음극 방식의 가스 이온원의 가능성 평가에 관한 연구 |
한국정밀공학회지
|
2011-03 |
기계장비 제어특성 시뮬레이션 플랫폼 기술 |
한국정밀공학회지
|
2011-01 |
유도결합형 플라즈마 소스를 이용한 집속 이온빔용 가스 이온원 개발 |
한국정밀공학회지
|
2010-12 |
The fabrication of metal silicide nanodot arrays using localized ion implantation |
Nanotechnology
|
2010-10 |
An electrochemomechanical polishing process using magnetorheological fluid |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2010-08 |
Analysis of the Machining Characteristics of EDM as Functions of the Mobilities of Electrons and Ions |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2010-08 |
Motor Current Prediction of a Machine Tool Feed Drive Using a Component-Based Simulation Model |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
2010-08 |
선택적 빔 차단을 통한 집속이온빔 가공 정밀도 향상 |
한국정밀공학회지
|
2010-06 |
Fabrication of Nanochannels with High Aspect Ratios on a Silicon Substrate by Local Focused Ion Beam Implantation and Deep Reactive Ion Etching |
Japanese Journal of Applied Physics
|
2010-06 |
Design and Fabrication of Multi-Aperture Plate for Multi-Ion Beam Patterning System |
Japanese Journal of Applied Physics
|
2010-01 |
Multiple excitation of localized surface plasmon to create a 10 nm x 10 nm strong optical spot using an Au nanoparticle array-based ridge waveguide |
Optics Express
|
2010-01 |
Prediction of nanopattern topography using two-dimensional focused ion beam milling with beam irradiation intervals |
MICROELECTRONIC ENGINEERING
|
2009-12 |
Energy Consumption Reduction Technology in Manufacturing - A Selective Review of Policies, Standards, and Research |
International Journal of Precision Engineering and Manufacturing
|
2009-11 |
Bimorph nano actuators synthesized by focused ion beam chemical vapor deposition |
Microelectronic Engineering
|
2009-10 |
Virtual EDM simulator: Three-dimensional geometric simulation of micro-EDM milling processes |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2009-08 |
Parameter optimization for finishing hard materials with magnetorheological fluid using the penalized multi-response Taguchi method |
Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture
|
2009-07 |
Deburring microfeatures using micro-EDM |
Journal Of Materials Processing Technology
|
2009-06 |
Tribological Properties of a Magnetorheological (MR) Fluid in a Finishing Process |
Tribology Transactions
|
2009-06 |
Electrostatically actuated carbon nanowire nanotweezers |
Smart Materials & Structures
|
2009-06 |
Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2009-05 |
Behavioral model for magnetorheological fluid under a magnetic field using Lekner summation method |
Journal Of Magnetism And Magnetic Materials
|
2009-04 |
Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
|
2009-04 |
A behavioral model of axisymmetrically configured magnetorheological fluid using Lekner summation |
Journal of Applied Physics
|
2009-02 |
Microfabrication Method using a Combination of Local Ion Implantation and Magnetorheological Finishing |
Applied Physics Express
|