2024-11 |
Microfluidics-based condensation bioaerosol sampler for multipoint airborne virus monitoring |
Biosensors and Bioelectronics
|
2024-05 |
Integrated microfluidic-based ultrafine water condensation particle counter (UWCPC) for monitoring of airborne nanoparticle generation and growth mechanisms |
Environmental Science: Nano
|
2023-01 |
Mems-Based Water Collection Condensation Particle Counter (WCCPC) Optimized for Multi-Point Monitoring of Airborne Nanoparticles |
Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
|
2023-01 |
Intelligent PM 2.5 mass concentration analyzer using deep learning algorithm and improved density measurement chip for high-accuracy airborne particle sensor network |
Journal of Aerosol Science
|
2022-08 |
Mechanical Characterization and Analysis of Different-Type Polyimide Feedthroughs Based on Tensile Test and FEM Simulation for an Implantable Package |
MICROMACHINES
|
2022-07 |
Airborne nanoparticle analysis mini-system using a parallel-type inertial impaction technique for real-time monitoring size distribution and effective density |
SENSORS AND ACTUATORS A-PHYSICAL
|
2022-06 |
An integrated electrical condensation particle counter for compact and low-cost ultrafine particle measurement system |
JOURNAL OF AEROSOL SCIENCE
|
2022-04 |
A Study on Biocompatible Polymer-Based Packaging of Neural Interface for Chronic Implantation |
MICROMACHINES
|
2022-02 |
Lab-on-printed circuit board based water harvesting condensation particle counter for ubiquitous monitoring of airborne ultrafine particles |
JOURNAL OF AEROSOL SCIENCE
|
2022-01 |
Portable multilateral measurement system employing Optical Particle Counter and one-stage Quartz Crystal Microbalance to measure PM10 |
SENSORS AND ACTUATORS A-PHYSICAL
|
2021-12 |
Inductive particle detection system for real-time monitoring of metals in airborne particles |
SENSORS AND ACTUATORS A-PHYSICAL
|
2021-07 |
Development of a real-time total suspended particle mass concentration measurement system based on light scattering for monitoring fugitive dust in construction sites |
SENSORS AND ACTUATORS A-PHYSICAL
|
2021-07 |
Microfluidic Airborne Metal Particle Sensor Using Oil Microcirculation for Real-Time and Continuous Monitoring of Metal Particle Emission |
MICROMACHINES
|
2021-04 |
Microfluidic ultrafine particle dosimeter using an electrical detection method with a machinelearning- aided algorithm for real-time monitoring of particle density and size distribution |
LAB ON A CHIP
|
2021-01 |
Monitoring the Effective Density of Airborne Nanoparticles in Real Time Using a Microfluidic Nanoparticle Analysis Chip |
ACS Sensors
|
2020-04 |
DMA 내 막대형 시스 유동 층류화 장치에 의한 샘플 유동 정렬 및 입자 분류 효율 향상 |
Transactions of the Korean Society of Mechanical Engineers, B
|
2020-03 |
Microfluidic condensation nanoparticle counter using water as the condensing liquid for assessing individual exposure to airborne nanoparticles |
LAB ON A CHIP
|
2019-10 |
Microelectromechanical-system-based condensation particle counter for real-time monitoring of airborne ultrafine particles |
ATMOSPHERIC MEASUREMENT TECHNIQUES
|
2019-04 |
MEMS-based condensation particle growth chip for optically measuring airborne nanoparticle concentration |
LAB ON A CHIP
|
2018-11 |
Tightly Sealed 3D Lipid Structure Monolithically Generated on Transparent SU‑8 Microwell Arrays for Biosensor Applications |
ACS APPLIED MATERIALS & INTERFACES
|
2018-11 |
An ant-clogging method for improving the performance and lifespan of blood plasma separation devices in real-time and continuous microfluidic systems |
SCIENTIFIC REPORTS
|
2018-10 |
MEMS-based particle detection system for measuring airborne ultrafine particles |
SENSORS AND ACTUATORS A-PHYSICAL
|
2018-08 |
Particle size spectrometer using inertial classification and electrical measurement techniques for real-time monitoring of particle size distribution |
LAB ON A CHIP
|
2018-01 |
Plasma extraction rate enhancement scheme for a real-time and continuous blood plasma separation device using a sheathless cell concentrator |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2017-10 |
Wearable triboelectric nanogenerator using a plasma-etched PDMS?CNT composite for a physical activity sensor |
RSC ADVANCES
|
2017-08 |
Design of wearable hybrid generator for harvesting heat energy from human body depending on physiological activity |
SMART MATERIALS AND STRUCTURES
|
2017-03 |
Electrodeposition and Characterization of Nanocrystalline Ni-B with Low Boron Content for MEMS Applications |
SENSORS AND MATERIALS
|
2017-01 |
MEMS-based Ni-B probe with enhanced mechanical properties for fine pitch testing |
Micro and Nano Systems Letters
|
2016-11 |
Triboelectric-thermoelectric hybrid nanogenerator for harvesting frictional energy |
SMART MATERIALS AND STRUCTURES
|
2016-09 |
An Exploratory Study on the Feasibility of a Foot Gear Type Energy Harvester Using a Textile Coil Inductor |
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
|
2016-08 |
Batch-processed semiconductor gas sensor array for the selective detection of NOx in automotive exhaust gas |
Micro and Nano Systems Letters
|
2016-06 |
Refraction-Assisted Solar Thermoelectric Generator based on Phase-Change Lens |
SCIENTIFIC REPORTS
|
2015-09 |
An Anti-Adhesion Technique in Microfluidic Channel Using Dielectrophoresis for Particle Processing Microfluidic Chip Applications |
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY
|
2015-05 |
Modeling of a honeycomb-shaped pyroelectric energy harvester forhuman body heat harvesting |
SMART MATERIALS AND STRUCTURES
|
2014-10 |
Wearable thermoelectric generator for harvesting human body heat energy |
SMART MATERIALS AND STRUCTURES
|
2014-06 |
A dome-shaped piezoelectric tactile sensor arrays fabricated by an air inflation technique |
SENSORS AND ACTUATORS A-PHYSICAL
|
2014-02 |
Inductor array for minimising transfer efficiency decrease of wireless power transmission components at misalignment |
ELECTRONICS LETTERS
|
2014-01 |
Sheathless microfluidic particle focusing technique using slanted microstructure array |
MICROFLUIDICS AND NANOFLUIDICS
|
2013-12 |
An integrated microchannel with continuous electrodynamic anti-adhesion capability for particle loss reduction in air-based microfluidic chips |
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
|
2013-11 |
Power generation of a thermoelectric generator with phase change materials |
Smart Materials and Structures
|
2013-06 |
Drop-on-demand hybrid printing using a piezoelectric MEMS printhead at various waveforms, high voltages and jetting frequencies |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2012-10 |
Facile fabrication of sub-20-nm nanochannels based on crystallinity- dependent anisotropic etching of silicon |
Microelectronic Engineering
|
2012-09 |
Improvement of wireless power transmission efficiency of implantable subcutaneous devices by closed magnetic circuit mechanism |
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
|
2012-08 |
Flexible thermoelectric generator for human body heat energy harvesting |
ELECTRONICS LETTERS
|
2012-07 |
Electromagnetic human vibration energy harvester comprising planar coils |
ELECTRONICS LETTERS
|
2012-07 |
Miniaturized One-Point Detectable Electrocardiography Sensor for Portable Physiological Monitoring Systems |
IEEE Sensors Journal
|
2012-06 |
실내공기오염 제어 및 평가 - 실내 공기오염 감지 기술 |
공기청정기술
|
2012-04 |
An electrodynamic preconcentrator integrated thermoelectric biosensor chip for continuous monitoring of biochemical process |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2012-04 |
A hybrid electrohydrodynamic drop-on-demand printing system using a piezoelectric MEMS nozzle |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2012-04 |
Spontaneous synchronized burst firing of subthalamic nucleus neurons in rat brain slices measured on multi-electrode arrays |
NEUROSCIENCE RESEARCH
|
2012-01 |
A resonant frequency switching scheme of a cantilever based on polyvinylidene fluoride for vibration energy harvesting |
SMART MATERIALS & STRUCTURES
|
2011-11 |
Application and performance test of a micro-machined unipolar charger for real-time measurements of exhaust particles from a diesel engine vehicle |
JOURNAL OF AEROSOL SCIENCE
|
2011-09 |
유전영동을 이용한 미세유체채널 내부의 입자 손실 저감 기술 |
센서학회지
|
2010-12 |
A FLEXIBLE RF TRANSMITTER MODULE BASED ON FLEXIBLE PRINTED CIRCUIT BOARD BY USING MICRO-MACHINING FABRICATION PROCESS |
Microwave and Optical Technology Letters
|
2010-10 |
A flexible tactile sensor based on a thermoelectric device for simultaneous detection of contact heat and contact force |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2010-09 |
Hybrid cell sorters for on-chip cell separation by hydrodynamics and magnetophoresis |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2010-05 |
Development and performance test of a micromachined unipolar charger for measurements of submicron aerosol particles having a log-normal size distribution |
JOURNAL OF AEROSOL SCIENCE
|
2010-03 |
Wall loss reduction technique using an electrodynamic disturbance for airborne particle processing chip applications |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2010-01 |
Conversion of NO to NO2 in air by a micro electric NOx converter based on a corona discharge process |
Analyst
|
2010-01 |
Detection of hydrogen and NOx gases based on a thermoelectric gas sensor with an embedded tin oxide catalyst |
Sensors And Materials
|
2009-10 |
On-demand electrohydrodynamic jetting with meniscus control by a piezoelectric actuator for ultra-fine patterns |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2009-09 |
MEMS 기술과 유연인쇄회로기판 기술을 이용한 단일지점 검침 심전도 센서 |
센서학회지
|
2009-07 |
Gas sensing properties of WO3 doped rutile TiO2 thick film at high operating temperature |
Current Applied Physics
|
2009-07 |
size classification of airborne particle for air-based lab-on-a-chip using micromachaned electrical mobility analyzer |
Current Applied Physics
|
2009-07 |
Electrical Characterization of a Microstrip Line Patterned by Electrohydrodynamic Jet Printing of Silver Nanoparticles |
Journal Of Imaging Science And Technology
|
2009-05 |
수정된 라플라시안 센서를 이용한 심박변이도 측정에 관한 연구 |
전기학회논문지A
|
2009-05 |
폴리머 재료를 이용한 유연 수직/수평 힘 센서 어레이 개발 및 응용 |
한국정밀공학회지
|
2009-05 |
New bio-aerosol collector using a micromachined virtual impactor |
JOURNAL OF AEROSOL SCIENCE
|
2009-03 |
Robust and real-time monitoring of nerve regeneration using implantable flexible microelectrode array |
Biosensors & Bioelectronics
|
2009-02 |
전기적으로 분류 입경의 제어가 가능한 가상 임팩터를 이용한 대기 중 나노 입자의 분류 |
한국정밀공학회지
|
2009-02 |
A micro-thermoelectric gas sensor for detection of hydrogen and atomic oxygen |
Analyst
|
2009-01 |
A hybrid chip based on aerodynamics and electrostatics for the size-dependent classification of ultrafine and nano particles |
Lab on a Chip
|
2009-01 |
Wireless power transmission for implantable devices using inductive component of closed magnetic circuit |
Electronics Letters
|
2008-12 |
Structuring of conductive silver line by electrohydrodynamic jet printing and its electrical characterization |
JOURNAL OF PHYSICS: CONFERENCE SERIES
|
2008-12 |
Design and evaluation of a silicon based multi-nozzle for addressable jetting using a controlled flow rate in electrohydrodynamic jet printing |
Applied Physics Letters
|
2008-11 |
Integrated particle detection chip for environmental monitoring |
Lab on a Chip
|
2008-08 |
A micromachined microcalorimeter with split-flow microchannel for biochemical sensing applications |
Sensors and Actuators B-Chemical
|
2008-06 |
Neisseria meningitidis detection based on a microcalorimetric biosensor with a split-flow microchannel |
Journal Of Microelectromechanical Systems
|
2008-05 |
실시간 박테리아 감지를 위한 정전용량방식의 MEMS 바이오센서 |
센서학회지
|
2008-05 |
Flexible contact force sensing device using metal/polymer multilayer structure for robotic applications |
Sensors And Materials
|
2008-03 |
BCG detection based on a split-flow microcalorimetric biosensor for the diagnosis of tuberculosis |
Biochip Journal
|
2008-03 |
A simple and direct biomolecule detection scheme based on a microwave resonator |
Sensors and Actuators B-Chemical
|
2007-12 |
Low-loss thin film microstrip lines and filters based on magnetorheological finishing |
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES
|
2007-09 |
Function-inspection scheme for an injured peripheral nerve using a polymer based microelectrode array |
SENSORS AND ACTUATORS A-PHYSICAL
|
2007-07 |
Micromachined cascade virtual impactor with a flow rate distributor for wide range airborne particle classification |
APPLIED PHYSICS LETTERS
|
2007-06 |
나노 입자를 이용한 PCB 기반 후막 가스 센서 |
마이크전자 및 패키징학회지
|
2007-06 |
A polymer-based flexible tactile sensor for both normal and shear load detections and its application for robotics |
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
|
2007-03 |
Functional antenna integrated with relative humidity sensor using synthesised polyimide for passive RFID sensing |
ELECTRONICS LETTERS
|
2006-10 |
A novel relative humidity sensor based on microwave resonators and a customized polymeric film |
SENSORS AND ACTUATORS B-CHEMICAL
|
2006-10 |
Miniaturized CBCPW bandpass filter based on thin film polyimide on lossy silicon |
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
|
2006-10 |
Micromachined elevated CPWs for high-performance microwave circuits |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING
|
2006-10 |
Mechanical detection of liposomes using piezoresistive cantilever |
SENSORS AND ACTUATORS B-CHEMICAL
|
2006-09 |
Large displacement out-of-plane bimorph actuator for optical application |
KEY ENGINEERING MATERIALS
|
2006-06 |
Large Displacement Polymer Bimorph Actuator for Out-of-Plane Motion |
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
|
2006-05 |
벌크 마이크로 머시닝을 이용한 고감도 미세 칼로리미터의 설계 및 제작 |
센서학회지
|
2006-03 |
Front-to-back alignment techniques in microelectronics/MEMS fabrication: A review |
SENSOR LETTERS
|
2006-03 |
Structuring of micro line conductor using electro-hydrodynamic printing of a silver nanoparticle suspension |
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
|
2005-09 |
핀-핀 형 전극의 전기수력학 프린팅에서 전극 직경이 미세 세라믹 패턴 형성에 미치는 영향 |
정보저장시스템학회지
|