2009-05 |
Simultaneous structural topology optimization of electromagnetic sources and ferromagnetic materials |
Computer Methods In Applied Mechanics And Engineering
|
2009-05 |
Optimal Design of Moving-Magnet Type Actuators for Optical Disk Drives Considering Effect of Coil Electromagnet |
IEEE TRANSACTIONS ON MAGNETICS
|
2009-05 |
Structural Topology Optimization of Magnetic Actuators Using Genetic Algorithms and ON/OFF Sensitivity |
IEEE TRANSACTIONS ON MAGNETICS
|
2009-05 |
Optimal Shape Design of the Perpendicular Magnetic Recording Head |
IEEE TRANSACTIONS ON MAGNETICS
|
2009-03 |
2축 소형 구동기 판 스프링의 동특성 개선 |
정보저장시스템학회논문집
|
2009-02 |
Design guide of bolt locations for bolted joint plates considering dynamic characteristics |
Proceedings Of The Institution Of Mechanical Engineers Part C-Journal Of Mechanical Engineering Science
|
2008-11 |
Structural parameters identification using improved normal frequency response function method |
Mechanical Systems And Signal Processing
|
2008-11 |
Magnetic Actuator Design Using Level Set Based Topology Optimization |
Ieee Transactions On Magnetics
|
2008-10 |
Design of a Halbach magnet array based on optimization techniques |
Ieee Transactions On Magnetics
|
2008-09 |
Structural optimization of ferromagnetic materials based on the magnetic reluctivity for magnetic field problems |
Computer Methods In Applied Mechanics And Engineering
|
2008-08 |
자기장의 균일성을 고려한 자기공명장치의 최적설계 |
대한기계학회논문집 A
|
2008-06 |
Optimal design of an electromagnetic coupler to maximize force to a specific direction |
Ieee Transactions On Magnetics
|
2008-04 |
Numerical and experimental approach for the optimal design of a dual plate under ballistic impact |
International Journal of Modern Physics B
|
2008-03 |
가동자석형 광 픽업 엑츄에이터의 개발 |
정보저장시스템학회 논문집
|
2008-01 |
Dynamic analysis of a linear motion guide having rolling elements for precision positioning devices |
Journal of Mechanical Science and Technology
|
2007-12 |
위상-치수 최적화에 의한 마이크로 구동기 판 스프링의 설계 |
한국소음진동공학회논문집
|
2007-12 |
순차적 실험계획법을 이용한 위상 최적 설계 |
정보저장시스템학회논문집
|
2007-12 |
가동 자석형 3축 구동 엑츄에이터 개발 |
정보저장시스템학회논문집
|
2007-11 |
높은 유연 모드 주파수를 갖는 가동 자석형 광 픽업 액추에이터 개발 |
한국소음진동공학회논문집
|
2007-06 |
Optimal design of a variable stiffness joint using permanent magnets |
IEEE TRANSACTIONS ON MAGNETICS
|
2007-06 |
Development of "L-shaped" rotary voice coil motor actuator for ultra slim optical disk drive using integrated design method based on coupled-field analysis |
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS
|
2007-05 |
Design of swing arm type actuators considering thermal and dynamic characteristics |
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
|
2007-05 |
Design of swing arm actuator for small and slim optical disc drives |
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
|
2007-03 |
정자장 문제의 균질화 기법의 비교 |
대한기계학회논문집 A
|
2007-01 |
Topology optimization of a swing arm type actuator using the response surface method |
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
|
2006-12 |
유연디스크용 가동 코일형 광 픽업 액추에이터 개발 |
정보저장시스템학회논문집
|
2006-12 |
힘의 방향성을 고려한 전자기 커플러의 위상 최적화 |
정보저장시스템학회논문집
|
2006-10 |
Physical modeling and characteristics of a Johnsen-Rahbek type electrostatic chuck |
KEY ENGINEERING MATERIALS
|
2006-09 |
열안정성을 고려한 초소형 정보저장기기용 액추에이터 구조설계 |
정보저장시스템학회논문집
|
2006-09 |
분극방향과 재료분포의 연속적 근사방법을 고려한 압전형 액추에이터의 구조 설계 |
대한기계학회논문집 A
|
2006-03 |
Design of micro-actuators using compliant mechanism |
KEY ENGINEERING MATERIALS
|
2006-02 |
컴플라이언트 메커니즘을 이용한 스윙 암 액추에이터의 설계 |
대한기계학회논문집 A
|
2006-02 |
재료분포의 연속적인 근사를 이용한 위상최적설계 방법의 비교 연구 |
대한기계학회논문집 A
|
2005-11 |
An optimal design of magnetic actuators using topology optimization and the response surface method |
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
|
2005-09 |
볼트 체결 조건에 따른 두 판재의 동적 특성 예측 |
대한기계학회논문집 A
|
2005-07 |
볼 베어링을 이용하는 직선 운동 가이드의 진동 해석 및 응용 |
대한기계학회논문집 A
|
2005-02 |
광픽업 액추에이터 판스프링 서스펜션의 최적설계 |
한국소음진동공학회논문집
|
2005-01 |
An optimization of a multi-layered plate under ballistic impact |
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
|
2004-11 |
영구자석과 요크를 포함한 자기 시스템의 위상최적설계 및 자기변형 센서의 바이어스 자석 설계에의 응용 |
대한기계학회논문집 A
|
2004-10 |
FEM에 의한 볼트 결합 판재의 동특성 해석 |
한국소음진동공학회논문집
|
2004-10 |
구름 요소를 사용하는 LM 가이드에서의 마이크로스케일 진동현상 |
한국소음진동공학회논문집
|
2004-09 |
볼 베어링을 사용하는 선형 운동 가이드의 동적 특성 |
한국소음진동공학회논문집
|
2004-07 |
Modified method of topology optimization in magnetic fields |
IEEE TRANSACTIONS ON MAGNETICS
|
2004-04 |
자기장 내의 위상최적화 방법에 대한 연구 |
대한기계학회논문집 A
|
2004-04 |
A modified density approach for topology optimization in magnetic fields |
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
|
2004-03 |
자동차 현가장치 부품에 대한 신뢰성 기반 최적설계에 관한 연구 |
한국자동차공학회 논문집
|
2003-10 |
다중판재의 고속충돌에 관한 최적설계 |
대한기계학회논문집 A
|
2003-03 |
구조물의 위상 최적설계에 관한 고찰 |
한국전산구조공학회 논문집
|
2002-11 |
Topology Optimization for Reduction of Vibration Caused by Magnetic Harmonic Excitation |
IEEE TRANSACTIONS ON MAGNETICS
|
2002-09 |
Structural optimization in magnetic fields using the homogenization design method. Part II: Reduction of vibration caused by magnetic forces |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
|
2002-07 |
Brake Moan Noise 소거를 위한 Brake Pad 위상최적화의 GA 적용 |
한국자동차공학회 논문집
|
2002-07 |
유한요소법의 개선에 따른 형상최적화 향상에 관한 연구 |
대한기계학회논문집 A
|
2002-05 |
Reduction of Vibration Caused by Magnetic Force in a Switched Reluctance Motor by Topology Optimization |
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
|
2001-12 |
Structural Optimization in Magnetic Fields Using the Homogenization Design Method - Part I |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
|
2001-10 |
자기장에 의한 조화가진을 받는 구조물의 위상최적화 |
대한기계학회논문집 A
|
2001-08 |
Optimal structural design considering flexibility |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
|
2001-03 |
CAE의 개요 |
한국전산구조공학회지
|
2000-03 |
Structural Optimization in Magnetic Devices by the Homogenization Design Method |
IEEE TRANSACTIONS ON MAGNETICS
|
2000-01 |
Topology Optimization in Magnetic Fields Using the Homogenization Design Method |
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
|
1995-08 |
회전기계 볼베어링의 자동진단 시스템에 관한 연구 |
대한기계학회논문집 A
|
1995-05 |
롤러 베어링에서의 결함의 자동진단 |
한국소음진동공학회논문집
|
1993-01 |
장섬유강화 고분자복합판의 압축성형에 있어서 섬유의 분리와 배향의 상관관계에 관한 연구 |
대한기계학회논문집 A
|